Property Repair Systems

01626 331351

JOIST END REPAIR KITS - JOIST SPLICE KITS - TIMBER RESIN SPLICE KITS

STRENGTH UPGRADES - JOIST CARRIER BEAMS

3D SLOT & HOLE CUTTERS - ALL STEEL WOOD CHISELS

JOIST END BORON TREATMENT GEL - JOIST END BORON INJECTION PASTE

JOIST & WALL PLATE PRESERVATIVE BORON RODS

Our task is is give you the best advice and the best prices. Please let me know personally if you disagree.

David Moore - Managing Partner

dcmoore@timber.org.uk

Joist Repair - end plates and splice plates

Joist End Repair Plates are supplied as pairs of galvanised steel plates, pre-drilled, to be fixed with Coach Screws (included). The plates rest in or on the wall and allow for the rotted end to be cut off.

BM6 Plates - allow for up to 6 inches, 150mm, to be cut off - joist size 4 inches, 100mm deep, or more

BM9 Plates - allow for up to 9 inches, 225mm, to be cut off - joist size 4 inches, 100mm deep, or more

Only for joists 6 inches, 150mm, deep or larger,

BM17 Plates - allow for up to 17 inches, 432mm, to be cut off

BM6 Kit - - £17.78 plus VAT

BM9 Kit - - £22.28 plus VAT

BM17 Kit - - £26.77 plus VAT

Joist Splice Plate Kits are supplied as pairs of plates made from anodised aluminium treadplate, un-drilled, to be fixed with self drilling and tapping screws (included). The plates allow you to joint domestic joists at any point along their length.

JSP Small Kit - for joists from 4 inches up to 6 inches, 100mm - 150mm, in depth

JSP Medium Kit - for joists from 6 inches to 8 inches, 150mm - 200mm, in depth

JSP Large Kit - for joists from 8 inches up to 10 inches, 200mm to 250mm, in depth

JSP Small Kit - - £17.50 plus VAT

JSP Medium Kit - - £22.50 plus VAT

JSP Large Kit - - £27.60 plus VAT

Timber-Resin Splice Kit - beam end repair - bearing ends or mid-span sections

For repairing timber beams, lintols, rafters, tie beams, carrier beams, joists and bressumers. These bespoke beam kits contain a new, laminated structural timber, made in kiln dried wood to C24 Grade or higher, fitted with connector bars made from zinc plated 8.8 Grade High Tensile Allthread bar. Pouring or injection resins are also included.

Engineering - free Design, Method Statement and Tools List (Hire available).

Frequently purchased with this product - additional Structural Pouring Resin

£ POA - price on application, Immediate Free Quotation - call Angela or Andy on 01626 331351

We also manufacture unusual shaped timber repair components: for example, on the left

we have a Pizza Hut building with new frame legs, on the right a timber Tower part.

Strength Upgrades - reduce deflection - sagging beams, change of use: domestic to commercial

For stiffening timber beams, lintols, rafters, tie beams, carrier beams, joists and bressumers. Steel reinforcement, made from zinc plated 8.8 Grade High Tensile Allthread bar, or BS4449 Rebar is laid into a central slot and then Structural Epoxy Pouring resin is added to form a permanent upgrade. This 'modified flitch' usually doubles the stiffness of the average beam.

Engineering - free Design, Method Statement and Tools List (Hire available).

Frequently purchased with this product - additional Structural Pouring Resin

£ POA - price on application, Free Quotation - call Angela or Andy on 01626 331351

3D Cutters - deep hole and slot cutting

Ideal for fitting Timber-Resin Splice Kit Joist End repairs.

A high speed tool for use in electric drilling machines. The 3D Cutter drills holes, cuts slots and can be dragged sideways to clean out previously rough drilled or cut out slots or holes.

25mm diameter x 110mm length - - £24.40 plus VAT

32mm diameter x 110mm length - - £25.83 plus VAT

Extended length versions:

25mm diameter x 250mm length - - £38.50 plus VAT

32mm diameter x 250mm length - - £39.77 plus VAT

All Metal Chisels - deep slot clearance

Ideal for cleaning out slots when fitting Timber-Resin Splice Joist End repair kits.

All Metal Chisels, made of solid steel, can be used with lump hammers and as levers, to clean out slots and tidy up previously roughly cut out cavities in wood.

Standard length;

30mm wide - - £19.87 plus VAT

Extended length

30mm wide - - £39.87 plus VAT

Joist End Boron Treatment Gel

Boron Ultra Gel is a honey-like liquid. It is a higher concentration surface treatment for woodworm, Death Watch Beetle and rots. Also for protection where the timber has become wet and is vulnerable to attack by insects and rots, or for new timbers being installed in a damp area. Apply by brush. It can stain if too much is left on the surface after absorption has completed, so always remove excess with a damp cloth. It has no smell and no vapour.

Usage rate - allow about 4 square metres per litre on smooth timber, more if the surfaces are rough. For woodworm treatments, including as part of a Death Watch Beetle treatment, (500cc will cover about 2 square metres, 1 litre about 4 square metres and 2 litres about 8 square metres).

Frequently purchased with this product - Boron Ultra Paste, (for injecting into thick timbers and damp areas, like the bearings ends of joists in walls), Box of Vinyl Gloves (100, uni-handed).

£22.88 for 500cc, £33.01 for 1 litre, £57.19 for 2 litres, £10.97 for a box of 100 gloves, all plus VAT.

500cc 1 litre 2 litres Gloves

Brush Boron Gel onto Joist Ends

Boron Ultra Gel in 500cc, 1 litre and 2 litre pots

Joist End Boron Injection Paste

Boron Ultra Paste is a smooth white paste for use inside timber. Apply by injection, using the extensive tube provided. It has no smell, but can stain if any is left on the surface - wipe off excess with a damp cloth. It has no smell and no vapour. For woodworm treatments, including part of a Death Watch Beetle treatment. For woodworm and rot treatments where timbers are damp and are likely to remain damp, or become seasonally damp - e.g. window frames, joist ends, beam ends, wall plates, door posts, garden posts.

Usage rate - use our chart of hole spacings for various timber sizes as a guide, or call us on 01626 331351 and we'll calculate your exact requirements. (Hole Spacing Guide - click here to download)

Frequently purchased with this product - Boron Ultra Gel, (for brushing onto thick timbers and damp areas, like the bearings ends of joists in walls), Box of Vinyl Gloves (100, uni-handed), Plastic Plugs (colour choice - red brick, dark brown, cream limestone, 10mm diameter, tapered).

£30.74 for 400cc cartridge, £10.97 for a box of 100 gloves, all plus VAT.

400cc cartridge with extension

Gloves 10mm plastic plugs

Joist and Wall Plate Preservative Boron Rods

Boron Rods are made of high concentration fused Borate, for use inside timber. They are designed to slowly dissolve inside the wood, spreading a zone of treatment around each hole. They have no smell and no vapour. For woodworm and rot treatments where timbers are damp and are likely to remain damp, or become seasonally damp - e.g. window frames, joist ends, beam ends, wall plates, door posts, garden posts. Provides a long term reservoir of Boron protection - e.g. sheds, fence posts, window frames, timber framed buildings.

Usage rate - use our chart of hole spacings for various timber sizes as a guide, or call us on 01626 331351 and we'll calculate your exact requirements. (Hole Spacing Guide - click here to download)

Frequently purchased with this product - Boron Ultra Gel, (for brushing onto thick timbers and damp areas, like the bearings ends of joists in walls), Box of Vinyl Gloves (100, uni-handed), Plastic Plugs (colour choice - red brick, dark brown, cream limestone, 10mm diameter, tapered)

£14.92 - 8mm x 24mm packet of 10, £22.90 - 8mm x 65mm packet of 10, all plus VAT

8mm x 24mm pack of 10 8mm x 65mm pack of 10

10mm plastic plugs pack of 25 Gloves

Looking for a solution to a problem:

• Joist end repair - use Joist End Repair Kits
• Joist span repairs - use Joist Splice Plates
• Timber Beam end failure - use a Timber-Resin Splice kit

Free Technical Advice on all these subjects: call Angela, Andy or David on 01626 331351

Home | Repairs | Bower Beams | Dry Rot | Privacy Policy | Returns Policy | Contact